In relation to NE (New) parts, many OEMs change their prices and availability without any notice to dealers or the industry. Therefore, through the REQUEST or RFQ indication, we ask that customers contact us for the most accurate price and availability.

In relation to SV & OH parts, the used parts aftermarket in the aviation industry is not an infinite supply. It is a dynamic, constantly changing market that is significantly affected by and susceptible to highs and lows in supply and demand. Therefore, although we attempt to, at times, we are unable to predict the exact moment when an item may be available. Once again, through the REQUEST or RFQ indication on our website, we ask that customers contact us for the most current and accurate price and availability.

Garmin has provided Service Advisory 2051 for general recommendations, materials, and supplies to clean and disinfect Garmin products. Otherwise, not following the recommendations could void the warranty.

• Cleaners containing ammonia will harm the anti-reflective coating on many Garmin aviation display lenses.
• Disinfectant with a solution of 70% isopropyl alcohol that does not contain ammonia is preferred. Solutions of up to 91% isopropyl alcohol are also acceptable.
• Clean the display lens using a clean lint-free cloth and a cleaner that is specified as safe for anti-reflective coatings.
• For other exposed surfaces such as knobs, buttons, and bezels, a damp cloth with soap and water is acceptable.
• Bleach-based cleaners, ammonia-based cleaners, or other harsh chemicals on any surface are not recommended.
• Remove all soap/soap residue to prevent buttons and knobs from gumming up or becoming slippery.
• Many aviation products are not rated as waterproof. Spraying or wetting the units to the extent where moisture could go beyond the exterior surfaces could damage the unit.

The KLN-94 is not a WAAS GPS, nor is it upgradeable to one. We recommend the KT-74, but if you decide to upgrade to a GPS400W or GNS430W, then you would want to go with a GTX-330.

In regards to your RV-6A, upgrading to the GTX 330ES will take care of your 2020 requirements for ADS-B. As you already have a GTX 327 and a GNS 430W, you may be more pleased with the installation of a GDL 88 standard. The prices of the units are similar even once you add the new antenna for the GDL-88 (give or take about $150). The labor to install the GDL 88 will be more, but with the GDL 88 you will get free weather and traffic on the GNS 430W. This would then free up the Garmin 696 and the GDL 39 for your Luscombe.

In regards to your 1947 Luscombe 8-E, your options are not as straight forward. You have no WAAS/GPS receiver in the aircraft so one of the UAT units like the GDL 88/84 from Garmin, NGT-2500 from L-3, or the RANGR 978 from Freeflight will be your best option to give the ADS-B Out. The RANGR 978, with its control head (required per the installation manual), may be the least expensive option but all three will have a fair amount of labor for the installation.

First, please reference the information Garmin provides in relation to the ES upgrade:

http://www.garmin.com/us/intheair/ads-b/seven-questions/

There is perhaps a misconception that simply having your Garmin GTX-330 transponder upgraded to include Extended Squitter capability is the only step for ADS-B Out compliance. As with almost all ADS-B installations, appropriate interfacing to other systems in the aircraft (ex. approved position source & altitude source) is required along with approved guidance material that indicates the airworthiness approval procedure followed for return to service of the aircraft (ex. AML STC). Garmin provides an Installation Manual with Approved Model List STC for its Aviation dealers. Authorized dealers should not be distributing the necessary data and paperwork for the ADS-B installation to non-dealers.

As with all ADS-B installations, Southeast Aerospace strongly recommends that you only contact and consult a trained, authorized avionics dealer.

UPDATE

5/9/2018

Bendix/King, L3 and ACSS released the NXT-700/MST-70B as form fit replacement for the MST-67A. It is DO-260B compliant to meet the ADS-B Out mandate.

There are other options besides the MST-70B to gain ADS-B compliance. There are various STCs that allow the removal of the Bendix/King transponder system and installation of Rockwell Collins or Garmin transponders. Upgrade prices vary depending on actual installed equipment. 

Regarding ADS-B for the Garmin GTX-330 transponders, the best solution is to simply have the units converted by Garmin to include the ES (Extended Squitter) upgrade. This upgrade is about $2000 approximately. Additionally, a WAAS/GPS source will need to be interfaced. We can process the upgrade for you or any other Garmin dealer can as well.

First, we would recommend contacting a local Garmin dealer to discuss the following:

• Upgrading your existing nav/com to a used GNS-530W or the newer GTN-750.
• If you already have a Garmin transponder (i.e. GTX-330), then you should simply get the ES upgrade, interface to GNS-530W or GTN-750, along with a few other minor installation considerations, and get the shop to do the appropriate paperwork based on Garmin's AML STC.
• If you do not have the GTX-330, then you should just consider pursuing one of the GDL systems from Garmin. Most likely the GDL88 which will give you In/Out capability. Same interface and installation considerations as above apply. Please note ADS-B In is not required for the mandate.

As a dealer for an Original Equipment Manufacturer (OEM), it is required to commit to a dealership agreement. Garmin's dealer agreement states that certain TSO'd products must be installed by the dealer for the factory warranty to be valid. There are generally 2 reasons for this policy. First, the OEM wants to minimize their liability risk by assuring their equipment is installed by factory trained and knowledgeable technicians. Second, Garmin wishes to maintain their products integrity by making sure the product is installed and operating properly so the customer is satisfied with the performance. Avionics installations and interfacing can sometimes be very complex. It is very important that pilots, aircraft owners and operators ensure installations are performed by skilled, experienced technical personnel to provide the safest flying environment and experience.

The Mode S aircraft identification code is listed on AC Form 8050-3, Certificate of Aircraft Registration, as the International Civil Aviation Organization (ICAO) Aircraft Address Code. If the aircraft registration does not contain this information, aircraft owners with a Mode S transponder can obtain an aircraft identification code from the FAA Aircraft Registry in Oklahoma City, Oklahoma. This may be accomplished by writing to the following FAA address:

Federal Aviation Administration
Aircraft Registration Branch AFS-750
P.O. Box 25504
Oklahoma City, OK 73125-0504

You may also call:
866-762-9434
405-954-3116

Newly Overhauled parts obtained from Garmin are designated with an N in their part number. This usually follows the 010- in the part number. As with most Garmin 010 part numbers, the N part numbers are for ordering purposes only and do not actually appear on the dataplate of the unit.

In relation to the transponder technology, a squawk refers to a response that a transmitter responder (i.e. transponder) is making to an interrogation from Air Traffic Control (ATC). In a classic Mode A/C transponder, a squawk response included very basic aircraft ID, general status, and pressure altitude information.

A squitter or squit is a transmission that frequently sends aircraft ID and position data while not being interrogated. In some Mode S transponders and ADS-B devices, the squit transmission can include up to almost 50 parameters including lat/long position, direction of flight, velocity, and more.